Pianos regularly make movers yearly list of items that are most frequently harmed. Grand pianos are particularly bothersome. Practicing the following treatments for disassembling, cushioning and loading grand pianos will avoid damage, lower claims cost, and enhance consumer satisfaction.
1) A minimum of three people are required to handle a child grand piano. If the infant grand piano requires to go up or down stairs or if a complete or performance grand piano needs to be carried, a minimum of four people are required.
2) Constantly complete a comprehensive and precise inventory. It may be more suitable or essential to utilize a visual inventory to sufficiently describe and show pre-existing damage.
3) As numerous parts are disassembled, please location all hardware in a correctly identified parts bag and then place the parts bag in a "Parts Box".
4) Eliminate the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the cover by removing the hinge pins. Have one person wiggle the cover, holding it opposite the hinge, while a 2nd person works the pin loose. Please be cautious not to harm the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a little fabric to help prevent damage to the wood if necessary. Wrap the cover in a tidy furniture pad.
6) Eliminate the prop that holds the lid open and wrap it in a clean furnishings pad. The prop has a hinge pin and remains in two pieces.
7) Remove the pedal assembly and cover it in a clean furniture pad. The braces at the rear of the assembly rest in slots at each end. When getting rid of the screws, please take care not to drop the braces. In addition, please be especially mindful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by putting a piece of masking tape with the suitable number on each rod. Note: If masking tape is not available, please use properly identified parts bags for this purpose. When reassembling at location, please make certain to put the rods in the right order so that the pedals will work properly.
8) Pad the piano by putting a tidy rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you handle the piano. Cover the top of the piano with 2 tidy furnishings pads, nicely folded around the keyboard. Usage rubber bands to secure the pads. Note: Please make sure that the surface of the piano is dust-free before padding it. Padding an extremely refined surface area that is dirty might trigger great scratches, specifically on a black lacquer surface.
9) Position a piano board and connect the straps so that it is prepared to receive the piano. The raised brace on the piano board need to be at the keyboard end of the piano.
10) Remove the left front leg by positioning someone below the piano at the left end of the keyboard. The other 2 people should support the left front corner. The individual beneath the piano need to turn the maintaining block so that the long end points away from the leg. The screws, if there are any, should then be gotten rid of. The "below" person should then extricate the piano prior to actually getting rid of the leg. Be sure to have two individuals raising the corner of the piano while the third person gets rid of the leg. Keep in mind: Please be sure to keep in mind which legs were eliminated from which positions since some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by decreasing their explanation the "leg-less" end onto the board. Please be sure to raise the whole piano a little while finishing this maneuver to avoid unnecessary pressure on the remaining, attached legs as the piano pointers. Be sure that the piano is focused comfortably versus the brace at the end of the piano board.
12) Eliminate the two remaining legs and cover them in tidy furniture pads. These legs are held in location by a "crucial and slot" plan. To eliminate the leg, slide it inward toward the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furnishings pads however under the straps to offer additional defense to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After adequately padding the stairs for defense against residence damage, put the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the top end of the piano board to avoid the piano from slipping.
16) To load the piano, leave it on the piano board and location it in a tier as the first base product with the keyboard facing the wall of the preceding tier. The very best place to fill the padded lid is in between the piano and the preceding tier or between the wall and the piano.
Although grand pianos represent a substantial challenge, they can be moved without damage by utilizing good sense and practicing the procedures noted above.